7.1CH Dual-Zone Receiver

Rated at 100 watts per channel for each of the 7 channels and a host of common features including: HDMI 1.3 switching; lossless audio decoding; AM/FM tuners with 30 presets; XM radio ready; automatic set-up with supplied microphone; Newcastle's SNAPTM Room EQ; input renaming; A/V Synch Delay; digital/analog input polling; independent audio and video outputs for Zone 2; RS-232 port for bi-directional control and more
The included remote supports dual-mode, RF and IR operation, is preprogrammed for most popular components and learns commands from other units
A second feature developed for custom installation is these receivers' "Automatic Room 2" mode. With this mode, the main room can be configured for 7.1 channel operation. When Zone 2 is activated, the main room is automatically reconfigured for 5.1 and the rear center amps are used to power Zone 2. When Zone 2 is turned off, the main room is reconfigured back to 7.1
An important feature for custom installation is the lockable Installer Memory. Once the initial installation is complete, the installer or the owner can lock all operating parameters into a special memory. If the unit fails to operate as expected because a wrong button had been selected on the remote, for example, power cycling the receiver will reload the initial configuration and should restore normal operation
Transcodes all analog video to a single component video output. Analog video and component video are separate and HDMI and analog monitor cables will be necessary to support all video and OSD

Shipping Note: Shipping to Alaska and Hawaii is not available for this item

The Postal Service now forbids shipping lithium batteries, or any items containing them, outside the US. We need a physical stateside address to ship your order to. Apologies to our APO/FPO customers.

Warranty: 90 Day Sherwood

Authorized for SquareTrade Extended Warranty

Amplifier:
Power Output, Stereo Mode: 6 Ω, THD 1%, 40Hz~20kHz	2 x 100W
Total Hardmonic Distortion: -3 dB, 6 Ω, 50W, 1 kHz	0.05%
Input Sensitivity/Impedance:	300 mV / 47 kΩ
S/N Ratio:	100 dB
Frequency Response:	+0, -3 dB
Output Level:	Tape, Room 2 Out, 2.2 kΩ: 300mV Subwoofer Out, 1 kΩ: 1.0V
Bass/Treble Control: 100 Hz/10 kHz	±10 dB
Surround Mode:	Front, 6Ω, 1 kHz, THD 1%: 110W / 110W Center, 6Ω, 1 kHz, THD 1%: 110W Surround, 6Ω, 1 kHz, THD 1%: 110W / 110W Surround Back (/MULTI) /Room 2, 6Ω, 1 kHz, THD 1%: 110W / 110W

Digital Audio:
Sampling Frequency:	32, 44.1, 48, 96 kHz
Digital Input Level:	Coaxial, 75 Ω: 0.5 Vp-p Optical, 660nm: -15 ~ -21 dBm

Video:
Video Format:	NTSC
Input Sensitivity, 75 Ω:	Video (composite): 1 Vp-p
HDMI Connector:	19 pin

FM Tuner:
Tuning Frequency Range:	87.5 ~ 108 MHz
Usable Sensitivity: THD 3%, S/N 30 dB	12.8 dBf
50 dB Quieting Sensitivity: mono/stereo	20.2 / 45.3 dBf
S/N Ratio: 65 dBf, mono/stereo	70 / 65 dB
Total Harmonic Distortion: 65 dBf, 1 kHz, mono/stereo	0.5 / 0.8%
Frequency Response: 30 Hz ~ 14 kHz	±3.0 dB
Stereo Separation, 1 kHz:	32 dB
Capture Radio:	4.0 dB
IF Rejection Ratio:	60 dB

AM Tuner:
Tuning Frequency Range:	520 ~ 1710 MHz
Usable Sensitivity:	500 µV/m
S/N Ratio:	40 dB
Selectivity:	25 dB

Sherwood Newcastle R-772 7.1CH Dual-Zone Receiver

Features

Specs

Sales Stats

Purchaser Experience

Purchaser Seniority

Quantity Breakdown

Percentage of Sales Per Hour

Percentage of Sales Per Day

Woots by State

RF Remote:
Operating Frequency:	2.433 GHz ± 100 kHz
RF Range:	50 ~ 100 feet
Sensitivity:	min -90 dB

General:
Power Supply:	120V ~ 60 Hz
Power Consumption:	3.7 A
Switched AC Outlets:	Total 120W (1 A) max
Dimensions:	17.38"(W) x 5.5"(H) x 14.5"(D)
Weight:	22.3 lbs